Custom Machine Services Acetal Spare Parts->chemical

Join

Help

Yangzhong Haiteng Fluorine Plastic Product Factory

Home

Company Profile

Products

Video

Inquiry

	Recommended Results

Custom Machine Services Acetal Spare Parts

Category :

Chemicals->Others->chemical

Custom Machine Services Acetal Spare Parts

Product Specification

Model No:	POM Machine Part

Country	CN
Brand	HAITENG
Packing	Paper Box
Minimum Order	200
Payment Term	L/C,T/T,D/P

Product Detail

Custom Machine Services Acetal Spare Parts Injection POM Parts


 


Features:Authentications 


Our products have passed related authentications ,and are widely approved,adopted and favored by domestic and foreign enterprises. 


 


 


The machining processes


1.Turning: For parts which have high surface requirement, wide-head cutters are better. When processing thin walled and soft material, cutters like knife are recommended. 
2. Milling: When milling the surface, end-milling is more cost-effective than circular milling. For circular and forming cutter, it should have less than two cutter edges. In this case, the tolerance caused due to the edge vibration can be lowered to the minimum.   
3. Sawing: Thin saws are usually used to saw thick parts to avoid the heating caused by friction. It would be better to use sharp and big sawblade. 
4. Drilling: When drilling the solid materials, make sure to use sharp drill, otherwise the increasing pressure during drilling will cause material cracks. 
The common document files accepted are : *.pdf/*.dwg/*.IGS/*.step/*.prt/*.sldprt Just send the drawings to us, we will handle the rest for you.


 


 


Images


<img src="http://i.bosscdn.com/product/be/1d/a6/c3f32fdd2a46bcfdd82a572d58.jpg" title="POM Machine Parts" alt="POM Machine Parts" />


<img src="http://i.bosscdn.com/product/46/69/8d/86e88100c05150528655f5322d.jpg" title="Contact Info" alt="Contact Info" />


<img src="http://i.bosscdn.com/product/15/b1/4a/5186be98c198fa41fadac2e9f3.jpg" title="POM parts by CNC Machine" alt="POM parts by CNC Machine" />


 


Technical data sheet
<table border="0" cellpadding="0" cellspacing="0" style="width:704px;" class="tcs ke-zeroborder">
<tbody>
<tr>
<td>
PROPERTIES
</td>
<td>
Unit
</td>
<td>
Value
</td>
</tr>
<tr>
<td colspan="3">
I.Physical Properties
</td>
</tr>
<tr>
<td>
Density
</td>
<td>
g/cm3
</td>
<td>
1.45
</td>
</tr>
<tr>
<td>
Water absorption 24hrs
</td>
<td>
%
</td>
<td>
< 0.3
</td>
</tr>
<tr>
<td colspan="3">
II.Thermal Properties
</td>
</tr>
<tr>
<td>
Heat deflection temperature - HDT/A
</td>
<td>
ºC
</td>
<td>
110
</td>
</tr>
<tr>
<td>
Min. service temperature
</td>
<td>
ºC
</td>
<td>
-40
</td>
</tr>
<tr>
<td>
Max. service temperature
</td>
<td>
ºC
</td>
<td>
100
</td>
</tr>
<tr>
<td>
Thermal conductivity at 23 ºC
</td>
<td>
W/(K*m)
</td>
<td>
0.31
</td>
</tr>
<tr>
<td>
Coefficient of linear thermal expansion
</td>
<td>
10-4*K-1
</td>
<td>
1.2
</td>
</tr>
<tr>
<td>
Flammability Rating(6mm thickness)
</td>
<td>
-
</td>
<td>
HB
</td>
</tr>
<tr>
<td colspan="3">
III.Mechanical Properties at 23ºC
</td>
</tr>
<tr>
<td>
Tensile strength at yield
</td>
<td>
MPa
</td>
<td>
63
</td>
</tr>
<tr>
<td>
Tensile strength at break
</td>
<td>
Mpa
</td>
<td>
-
</td>
</tr>
<tr>
<td>
Elongation at break
</td>
<td>
%
</td>
<td>
31
</td>
</tr>
<tr>
<td>
Modulus of elasticity after tensile test
</td>
<td>
MPa
</td>
<td>
2,700
</td>
</tr>
<tr>
<td>
Modulus of elasticity after flexural test
</td>
<td>
MPa
</td>
<td>
-
</td>
</tr>
<tr>
<td>
Hardness - Shore D
</td>
<td>
 
</td>
<td>
83
</td>
</tr>
<tr>
<td>
Charpy impact strength
</td>
<td>
kJ/m2
</td>
<td>
N. B.
</td>
</tr>
<tr>
<td>
Friction coefficient
</td>
<td>
 
</td>
<td>
0.35
</td>
</tr>
<tr>
<td colspan="3">
IV.Electrical Properties  at 23ºC
</td>
</tr>
<tr>
<td>
Dielectric constant at 1 MHz
</td>
<td>
106Hz
</td>
<td>
3.8
</td>
</tr>
<tr>
<td>
Dielectric loss factor at 1 MHz
</td>
<td>
106Hz
</td>
<td>
0.005
</td>
</tr>
<tr>
<td>
Volume resistively
</td>
<td>
Ohm (Ω) * cm
</td>
<td>
>1013
</td>
</tr>
<tr>
<td>
Surface resisively
</td>
<td>
Ohm (Ω)
</td>
<td>
>1013
</td>
</tr>
<tr>
<td>
Dielectric strength
</td>
<td>
kV/mm
</td>
<td>
40
</td>
</tr>
</tbody>
</table>


 



Characteristics 
-High surface hardness 
-Good wear resistance 
-Excellent machinability 
-Nice self-lubricating properties 
-Good dimensional stability 
-Low water absorption 
-Oil resistant 
-Work under the temperature of -40-100ºC


 

<div>



<div align="left">
<img src="http://i.bosscdn.com/product/fa/5d/d3/ed6b2c340d8e5e34935edac468.jpg" title="ptfe manufacture" alt="ptfe manufacture" /><img src="http://i.bosscdn.com/product/8f/6f/80/c2ff557432a5d977846b0d620d.jpg" title="ptfe manufacturer in China" alt="ptfe manufacturer in China" /> 
</div>
</div>

 
plasticptfe.com

More Products from this Supplier

OEM CNC UHMWPE Block Pad Spare Parts

Delrin Machined Spare Parts by CNC Machine

PU Coupling Pad with Red Black Color

Customized CNC Engineering Plastic UHMWPE Part


[ Back Products Catalog ]

Commerce Member:
Please log in your ID and password, we will later fill in relating info.

ID:

Password:

Remember my ID on this computer


	Complete this form below to send out your enquiries. All enquiries will be automatically sent to the company you want to develop.

	Subject
	Content	(Don't input Company Name, E-Mail, Phone Number, Fax Number, and URL)

Company Profile:

* Company Name

*E-mail

*Country

*Contact Person

URL

*Phone

- -

Fax

- -

*Postal code

*City

*Street Address

*Business Nature

Distributor Exporter Importer Manufacturer
Whole Sale Retailer Reseller Retrofitter User
Others, please specify:

*Security Code


Enter the security code.