Sign In Join Help
 
Chengdu Filtrascale Tech.Co.,Ltd

 
 
Recommended Results 
 
Filtrascale full automatic disc filter for waste watertreatment recycling purification 

  Category : Biotech->Environment->waste water treatment

     
Filtrascale full automatic disc filter for waste watertreatment recycling purification
 
 
       

  Product Specification
 
  Model No:      FC2KA1
  Country  CN
  Brand  Filtrascale
  Materials  Reinforced nylon、 PP
  Size  2 inch    
  Color  black
  Packing  wood box
  Minimum Order  1 Unit
  Payment Term  L/C、TT
  Unite flow rate  5-15m3/h
  Water consumption  Under 0.5%
  Backwashing time  7-15 seconds

 

    Product Detail
  Specifications
1、Super-speed and backwashing
2、Stable filtration efficiency with different precision(20um、55um、100um,130um、200um、400um)
3、Technical characteristics of accurate filtering and continuous filtration
4、easy operation and assembling, low cost of maintenance
Filtrascale full automatic disc filters using a specially designed disc filtration technology. Thin color-coded polypropylene discs are diagonally grooved on both sides to a specific micron size. A series of these discs are then stacked and compressed on a specially designed spine. When stacked,the groove on top runs opposite the groove below. The stack is enclosed in a corrosion and pressure resistant housing.
During the filtration process, the filtration discs are tightly compressed together by the spring’s power and the differential pressure, thus providing high filtration efficiency. Filtration occurs while water is percolates from the outer diameter to the inner diameter of the element. Depending on the micron rating, there are from 18 (in 400micron discs) to 32 (in 20 micron discs) stopping points in each track, thus creating the unique in-depth filtration.

Filtration Process
1、 The discs are compressed together by both the spring and the pressure difference on the tightening cap, forming a sturdy filter element preventing solids breakthrough.
2、 Inlet water flows into the filter through the filter element
3、 The suspended solids in the water are trapped on and between the discs
Backwashing Process
A command from the control unit to the filter’s inlet valve causes the value to close the filter’ inlet and open the drain.
1、 Filtered outlet water enters from the opposite direction through the outlet port of the filter.
2、 The flaps of the membrane are opened by the water pressure, allowing the water to flow only into the 3 flushing pipes.
3、 The water is forced through nozzles built into the flushing pipes.
4、 Water from the flushing pipes also flows into the piston and pushed the tightening cap up, decompressing the filtration element discs
5、 Tangential jets of water cause fast spinning of the separated discs and remove the trapped solids.
6、 The solids are flushed from the filter to the drain




   


[ Back Products Catalog ]

Commerce Member:
Please log in your ID and password, we will later fill in relating info.
 
ID: Password: Remember my ID on this computer
Complete this form below to send out your enquiries.
All enquiries will be automatically sent to the company you want to develop.
Subject
Content (Don't input Company Name, E-Mail, Phone Number, Fax Number, and URL)
   

 


Company Profile:
* Company Name
*E-mail
*Country
*Contact Person
URL
*Phone
- -
Fax
- -
*Postal code
*City
*Street Address
*Business Nature
Distributor   Exporter Importer Manufacturer
Whole Sale Retailer  Reseller Retrofitter User
Others, please specify:
*Security Code
Enter the security code.


Site Map l   Privacy Policy l Company Profile l Corporate Proposal l Contact Us l Help l Advertise With Us l  World Trade Link
    .